อุปกรณ์สั่งแฟลชแบบไร้สายแบบคลื่นวิทยุ Yongnuo RF-603 สามารถใช้ส่งสัญญาณได้ไกลถึง 25-50m มีระบบปลุกแฟลชเมื่อแฟลชปิดตัวเองเวลาไม่มีการใช้งานเป็นเวลานาน มาพร้อมกับสายลั่นชัตเตอร์ฟรีในชุด (โปรดระบุรุ่นกล้องลงในใบสั่งซื้อสินค้า)
The new RF-603 is a remote shutter release as well as a multi-functional radio flash trigger which can synchronously trigger flashes and studio strobes. Through the transceiver based system each item can be used flexibly as trigger or receiver. Only 2 AAA batteries are required as power source for each item. The 2.4GHz wireless frequency is suitable in most countries and guarantees high speed, distance and stability. Within capacious areas, the remote control distance may reach to 25-50m. The synchronization speed can reach to 1/320, depending on the situation it may reach to 1/250 or less. A set consist of 2 equal transceivers. Both of them can be a receiver as well as transmitter. It can trigger 1 flash with one set, since one serves as trigger and one as receiver. You can also buy additional transceivers to trigger 2 or more flashes at the same time. The pictures below just show one of the two sets.
Features : 1. Works as a wireless shutter release control - Auto focus, continuous shooting, long exposure, half-way pressing, full-way pressing is supported - Depending on the camera model a special shutter release cable is included in the package 2. Transceiver based system - works as a wireless flash trigger and receiver - Each RF-603 is designed to work as trigger and as receiver. The unit automatically detects the mode it should work in. You have the full flexibility out of your gear. - As a receiver it fires off-camera flashes which are placed on the hot shoe of the transceiver. - Additionally the transceivers PC Sync connector can be used to fire studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us. - Wake up function: Mount the transmitter into hot shoe of the camera, connect the receiver with the flash, press half-way the shutter button to wake up the flash at the same time, the green signal light will be bright for some seconds and then press shutter button completely to fire the flash. This "Wake up" function is only supported for flashes which have a sleep mode. - As a trigger the RF-603 can be placed in the cameras hot shoe or if you wish be connected with the camera by a PC Sync cable. In the latter case you are free to mount an additional flash top-camera. - One transceiver can trigger more than 1 flash at the same time. You would have to buy additional transceivers for 2 or more flashes, since you need one transceiver as a trigger and one or more transceivers as receivers. 3. Wireless trigger studio flash - Using a PC Sync cable the transmitter can wirelessly and synchronously trigger your studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
Specification : Type : FSK 2.4GHz wireless remote system Transmitter Distance : 25-50m Channel : 16 Channels Release : Half-way press, full-way press Transmitter Port : PC Sync Receiver Port : PC Sync, 2.5mm for shutter release Time of shooting : Up to 20000 times Receiver stand-by time : Up to 45 hours (using AAA batteries) Dimensions : 37mm x 30mm x 81.5mm Weight : 150g
Compatible Flashes : Nikon SB-900, SB-800, SB-700, SB-28, SB-27, SB-26, SB-25, SB-24 Canon 580EX II, 580EX, 540EZ, 520EZ, 430EZ, 430EX, 420EX, 420EZ, 380EX Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT Olympus FL-50, FL36 Sigma EF-500 DG Super, EF-500 DG ST, EF-430 Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D Vivitar 285HV Yongnuo YN460, YN462, YN465, YN467, YN468, YN560 And other flashgun which has " Wake up " function
|